Leading 10 typical forklift accidents ， forklift operation should focus on these issues ！.

Leading 10 typical forklift accidents ， forklift operation should focus on these issues ！.

Blog Article

Do not undervalue the forklift at the office. If the procedure is bad, there will be major crashes in mins, and there are several crashes including forklifts.

Case 1: The forklift cargo obstructed the driver's view, and the person in front could not be found, resulting in a moving crash.
Situation 2: In order to keep the balance of the forklift when lifting hefty products, the employees used their body weight as the counterweight, which almost caused casualties.
Case 3: The width of the forklift cargo surpasses the permitted size of the path and hangs on the roadside rack, which almost causes an mishap.
Case 4: Forklift is speeding up and surrender during a turn.
Case 5: The forklift driver did not observe the pedestrian, and the pedestrian did not notice the forklift.
Situation 6: The forklift lifts the employees illegally, the forklift chauffeur does not use the seat belt, the forklift lifter falls and the motorist is squashed when the forklift rolls over.
Case 7: The forklift motorist did not wear a safety belt and fell from the lorry when it rolled over and was squashed.
Forklift operation should pay attention to these issues ：.

Beginning.
1. Prior to beginning, observe the environments, and after verifying that there are no challenges that impede the safety and security of driving, beep the horn first and afterwards start.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) scale have to be safe before beginning.
3. When the forklift starts with a lots, the chauffeur needs to first confirm that the load is stable and trustworthy.
4. The begin needs to be sluggish and consistent.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground need to be kept at 300mm-400mm, and the mast should be slanted backwards. .
2. Do not lift the fork expensive when driving. When getting in and leaving the task site or while driving, beware that there will be no challenges overhead. When the load is taking a trip, the fork should not be elevated too high, which will certainly influence the security of the forklift. .
3. After discharging, the fork should be reduced to the regular driving position prior to driving. .
4. When turning, if there are pedestrians or cars close by, the driving signal ought to be released initially. High-speed doglegs are forbidden. High-speed doglegs will certainly trigger the lorry to lose side stability and topple. .
5. When the forklift is downhill, it is purely prohibited to turn off the fire and slide, and it is restricted to brake instantly while driving with loads unless there are special conditions.
6. When the forklift is running, it should follow the traffic rules in the factory and have to keep a particular safety distance from the vehicle ahead. .
7. When the forklift is running, the load should be in the most affordable placement that does not impede the driving, and the gantry ought to be appropriately tilted back. The tons will not be raised except when stacking or loading. .
8. The elevation of the lots should not obstruct the motorist's view. In unique scenarios, when the thing affects the forward vision, drive at a reduced speed when turning around.
9. It is restricted to activate the ramp, neither to drive across the ramp. .
10. The risk-free driving speed of the forklift in the factory area is 5 km/h, and it should drive safely at a low rate when going into the production workshop location. .
11. When the forklift is raised, lifted or driven, it is forbidden for employees to stand on the fork to hold products and play a stabilizing duty. .
12. If problems are discovered, they will certainly be repaired and reported in a prompt way, and they will certainly never run with diseases or conceal them.

packing and unloading.
1. When fork-loading things, the distance between both forks ought to be readjusted as needed to make the lots of the two forks balanced and not manipulated, and one side of the thing ought to be against the shelf. .
2. It is prohibited to collaborate with a solitary fork or use a fork top or pull. In unique situations, safety warning signs have to be set up to advise bordering pedestrians. .
3. In the process of loading and dumping products, the forklift must be stopped with the brake. .
4. The speed of the lorry ought to be slow and constant. Beware not to roll the wheels on the dunnage, so as not to extend the rolled items and harm individuals. .
5. When utilizing a fork to fork the goods, the fork needs to be as deep as possible under the lots, and it must be noted that the fork idea should not touch various other products or items. The lots ought to be maintained with minimal back tilt of the gantry to ensure that the lots does not slide backwards. The pole can be slanted ahead somewhat when the load is decreased to allow for easy positioning of the lots and extraction of the forks. .
6. It is forbidden to fork products at high speed and hit difficult things with the fork head. .
7. When the forklift is working, it is forbidden for people to stand around the fork, so regarding prevent the collapse of the goods and harm individuals. .
8. Overloading is prohibited, and it is restricted to use forks to raise workers to engage in high-altitude procedures to stay clear of high-altitude falling accidents. .
9. It is not permitted to make use of the brake inertia to slide, put, round or roll objects. .
10. It is not allowed to make use of forks to choose, turn pallet dump.

Leaving .
1. It is restricted to leave the forklift when the products on the fork are in the air. Before leaving the forklift, you have to dump the goods or lower the fork frame.
2. Pull the parking brake take care of to dead or dispirit the emergency brake button.
3. The engine is shut off and the power is cut off. (Except for special scenarios, such as the driver does not leave the lorry's view and does not exceed 1 minute).
4. Get rid of the trick. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the look should be inspected, and fuel, lubing oil and air conditioning water ought to be included.
2. Check the security efficiency of beginning, running and stopping.
3. Check whether the lights and horn signals are complete and efficient.
4. Throughout the procedure of the forklift, examine whether the stress and temperature level are normal.
5. After the forklift is running, the outside leak must additionally be checked and the seals must be replaced in time.

Forklift Safety Operation Specifications.
1. You should examine prior to leaving the auto;.
2. When you encounter a person before you during driving, you should send a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does Electric Forklift Truck for Warehouse not surpass 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m in the air;.
5. The transforming ought to not be too sharp to avoid the propensity of " totally free turning";.
6. Adding and down the incline ought to be slow and consistent, and no activating the slope is enabled.
7. Do not drive across the slope. When the gradient is higher than 10%, the vehicle needs to be driven in reverse when going downhill;.
8. When the forklift employees lug the goods and progress, if they encounter large or hefty products and most likely to the motorist's view, they ought to take the turning around workout
.
The "Eight Prohibitions" should be complied with in the operation.
1. Single fork procedure is not permitted.
2. It is not enabled to Electric Forklift Truck for Warehouse lift the goods for far away driving.
3. It is not permitted to pick up the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and other unsafe chemicals with forks.
5. It is not enabled to make use of inertia pressure to pick up the goods.
6. It is not enabled to utilize stopping force to exile round or easy-to-roll items.
7. It is not permitted to bring people to service the pallet or fork, and it is strictly forbidden to stand under the fork after the fork is elevated.
8. Do not drive side to side on inclines
.
Auto parking is not allowed under the following conditions.
1. Contours, narrow roads, train crossings;.
2. Sections with a longitudinal slope above 5%.
3. When there is an barrier on one side of the roadway, the opposite side of the section with the exact same size as the challenge should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844